Removing the plastic shroud to access the controller on the Pride Mobility GoGo Elite Traveller

The controller for the Pride Mobility GoGo Elite Traveller 3 and 4 wheel scooters are easily accessed from beneath the footboard shroud. The foot/front shroud is fastened with four Philips head screws. Two are located on the top of the scooter and the other two are located on the underside of the scooter. They are designated in the illustration below inside the green circles. 

To remove the shroud, tip the scooter on its side and remove the two screws. Then, move the scooter back upright and remove the two screws accessible from the top. Then, lift off the plastic shroud.